High-efficient surface tailoring via reverse atom transfer radical polymerization and reversible addition-fragmentation chain-transfer polymerization in an aqueous system initiated by a monocenter redox pair

The commonly used multi-center initiation methods always lead to the formation of quantities of homopolymer in the surface tailoring based on reverse atom transfer radical polymerization (ATRP) and reversible addition-fragmentation chain-transfer (RAFT) polymerization. In this study, a monocenter redox pair constructed of silica bearing tert-butyl hydroperoxide groups and ascorbic acid (SiO₂-TBHP/AsAc) was applied to substitute the commonly used initiation method of R-supported RAFT grafting polymerization. All the propagating radicals were restricted on the surface of solid particles during the whole procedure theoretically, resulting in a higher grafting efficiency of 95.1% combined with the “controllable” feature at 10 h. This redox pair was also used to initiate the reverse ATRP in miniemulsion successfully with a grafting efficiency of 86.3% at 10 h. The grafting efficiency obtained under this monocenter initiation method was significantly higher than that of the frequently reported surface modification by reverse ATRP and RAFT polymerization. In addition, the high-efficient surface tailoring was traced and confirmed by nuclear magnetic resonance, Fourier transform infrared, X-ray photoelectron spectroscopy, thermogravimetric analysis, transmission electron microscopy, and other analysis tests. The advantage of this monocenter redox pair will open a new avenue for the potential “high-efficient” surface tailoring of various materials.     

Visible light-driven acridone catalysis for atom transfer radical polymerization

Acridone as a new kind of visible light photocatalyst has been developed to catalyze metal free atom transfer radical polymerization (ATRP). The photocatalyst possess low excited state potential as can undergo an oxidative quenching pathway to initiate ATRP of vinyl monomers. Kinetic study and light on/off reaction demonstrate the “living”/controlled nature of the polymerization by light. Block copolymers can be achieved by using PMMA as macroinitiator to reinitiate polymerization of other vinyl monomers, which shows highly preserved Br chain-end functionality in the synthesized polymers. Moreover, the polymerization can be conducted under air atmosphere as most photocatalysts need anaerobic condition, which may give inspiration of further application of this kind of photocatalyst.     

Ultrahigh Loading Copper Single Atom Catalyst for Palladium-free Wacker Oxidation

Wacker oxidation is an industry-adopted process to transform olefins into value-added epoxides and carbonyls. However, traditional Wacker oxidation involves the use of homogeneous palladium and copper catalysts for the olefin addition and reductive elimination. Here, we demonstrated an ultrahigh loading Cu single atom catalyst(14% Cu, mass fraction) for the palladium-free Wacker oxidation of 4-vinylanisole into the corresponding ketone with N-methylhydroxylamine hydrochloride as an additive under mild conditions. Mechanistic studies by ¹⁸O and deuterium isotope labelling revealed a hydrogen shift mechanism in this palladium-free process using N-methylhydroxylamine hydrochloride as the oxygen source. The reaction scope can be further extended to Kucherov oxidation. Our study paves the way to replace noble metal catalysts in the traditional homogeneous processes with single atom catalysts.     

Single-atom Fe Embedded Co3S4 for Efficient Electrocatalytic Oxygen Evolution Reaction

Constructing atomically dispersed active sites with densely exposed and dispersed double metal-S_x catalytic sites for favorable OER catalytic activity remains rare and challenging. Herein, we design and construct a Fe₁S_x@Co₃S₄ electrocatalyst with Fe single atoms epitaxially confined in Co₃S₄ nanosheets for catalyzing the sluggish alkaline oxygen evolution reaction(OER). Consequently, in ultralow concentration alkaline solutions(0.1 mol/L KOH), such a catalyst is highly active and robust for OER with low overpotentials of 300 and 333 mV at current densities of 10 and 30 mA/cm², respectively, accompanying long-term stability without significant degradation even for 350 h. In addition, Fe₁S_x@Co₃S₄ shows a turnover frequency(TOF) value of 0.18 s⁻¹, nearly three times that of Co₃S₄(0.07 s⁻¹), suggesting the higher atomic utilization of Fe single atoms. Mössbauer and in-situ Raman spectra confirm that the OER activity of Fe₁S_x@Co₃S₄ origins from a thin catalytic layer of Co(Fe)OOH that interacts with trace-level Fe species in the electrolyte, creating dynamically stable active sites. Combined with experimental characterizations, it suggests that the most active S-coordinated dual-metal site configurations are 2S-bridged (Fe-Co)S₄, in which Co-S and Fe-S moieties are shared with two S atoms, which can strongly regulate the adsorption energy of reaction intermediates, accelerating the OER reaction kinetics.     

Fabricating Dual-Atom Iron Catalysts for Efficient Oxygen Evolution Reaction: A Heteroatom Modulator Approach

Understanding the thermal aggregation behavior of metal atoms is important for the synthesis of supported metal clusters. Here, derived from a metal–organic framework encapsulating a trinuclear Fe^III₂Fe^II complex (denoted as Fe₃) within the channels, a well-defined nitrogen-doped carbon layer is fabricated as an ideal support for stabilizing the generated iron nanoclusters. Atomic replacement of Fe^II by other metal(II) ions (e.g., Zn^II/Co^II) via synthesizing isostructural trinuclear-complex precursors (Fe₂Zn/Fe₂Co), namely the “heteroatom modulator approach”, is inhibiting the aggregation of Fe atoms toward nanoclusters with formation of a stable iron dimer in an optimal metal–nitrogen moiety, clearly identified by direct transmission electron microscopy and X-ray absorption fine structure analysis. The supported iron dimer, serving as cooperative metal–metal site, acts as efficient oxygen evolution catalyst. Our findings offer an atomic insight to guide the future design of ultrasmall metal clusters bearing outstanding catalytic capabilities.     

New Phenomena in Organometallic‐Mediated Radical Polymerization (OMRP) and Perspectives for Control of Less Active Monomers

The impact of reversible bond formation between a growing radical chain and a metal complex (organometallic‐mediated radical polymerization (OMRP) equilibrium) to generate an organometallic intermediate/dormant species is analyzed with emphasis on the interplay between this and other one‐electron processes involving the metal complex, which include halogen transfer in atom transfer radical polymerization (ATRP), hydrogen‐atom transfer in catalytic chain transfer (CCT), and catalytic radical termination (CRT). The challenges facing the controlled polymerization of “less active monomers” (LAMs) are outlined and, after reviewing the recent achievements of OMRP in this area, the perspectives of this technique are analyzed.     

Remote Fluorination and Fluoroalkyl(thiol)ation Reactions

Remote functionalization reactions have the power to transform a C−H (or C−C) bond at a distant position from a functional group. This Review summarizes recent advances and key breakthroughs in remote fluorination, trifluoromethylation, difluoromethylation, trifluoromethylthiolation, and fluoroalkenylation reactions. Several powerful strategies have emerged to control the reactivity and distal selectivity such as the undirected radical approach, the 1,5-hydrogen atom transfer, the metal migration, the use of distant directing groups, and the ring-opening reactions. These unconventional and predictable C−H (and C−C) functionalization transformations should allow for the preparation of a wide range of otherwise-difficult-to-access alkyl, aromatic, heteroaromatic, and structurally complex fluorides.     

Magnetic field as a means to identify initiating reaction in oxidation of organic substances with molecular oxygen

1. Download : Download high-res image (77KB)
2. Download : Download full-size image

     

Generation and Reactivity of a One-Electron-Oxidized Manganese(V) Imido Complex with a Tetraamido Macrocyclic Ligand

The synthesis and X-ray structure of a new manganese(V) mesitylimido complex with a tetraamido macrocyclic ligand (TAML), [Mn^V(TAML)(N-Mes)]⁻ ( 1 ), are reported. Compound 1 is oxidized by [(p-BrC₆H₄)₃N ]^+.[SbCl₆]⁻ and the resulting Mn^VI species readily undergoes H-atom transfer and nitrene transfer reactions.     

Rate constants of the reactions of O(3P) atoms with Br2 and NO2 over the temperature range 220-950 K

The kinetics of the reactions of Br₂ and NO₂ with ground state oxygen atoms have been studied over a wide temperature range, T = 220-950 K, using a low-pressure flow tube reactor coupled with a quadrupole mass spectrometer: O + NO₂ → NO + O₂ (1) and O + Br₂ → Br + BrO (2). The rate constant of reaction (1) was determined under pseudo–first-order conditions, either monitoring the kinetics of O-atom or NO₂ consumption in excess of NO₂ or of the oxygen atoms, respectively: k₁ = (6.1 ± 0.4) × 10⁻¹² exp((155 ± 18)/T) cm³ molecule⁻¹ s⁻¹ (where the uncertainties represent precision at the 2σ level, the estimated total uncertainty on k₁ being 15% at all temperatures). The temperature dependence of k₁, found to be in excellent agreement with multiple previous low-temperature data, was extended to 950 K. The rate constant of reaction (2) determined under pseudo–first-order conditions, monitoring the kinetics of Br₂ consumption in excess of O-atoms, showed upward curvature at low and high temperatures of the study and was fitted with the following three-parameter expression: k₂ = 9.85 × 10⁻¹⁶ T^1.41 exp(543/T) cm³ molecule⁻¹ s⁻¹ at T = (220-950) K, which is recommended from the present study with an independent of temperature conservative uncertainty of 15% on k₂.